Pantum CTL-1100C Cyan Color Toner
The Pantum CTL-1100C is a cyan color toner cartridge designed for use in Pantum laser printers. It is specifically formulated to produce high-quality cyan prints with accurate colors and sharp details. The CTL-1100C is compatible with various Pantum laser printer models, but it's always recommended to check the compatibility with your specific printer model before purchasing.
To replace the cyan toner cartridge, follow these general steps:
Make sure your Pantum printer is turned off and unplugged.
Open the printer's front cover or toner access panel. This may vary depending on the specific model of your printer. Consult your printer's user manual if you're unsure about the location of the toner cartridge.
Locate the cyan toner cartridge inside the printer. It should be easily visible once you open the toner access panel.
Gently pull the old cyan toner cartridge out of the printer. Be careful not to spill any toner or touch the imaging drum.
Unpack the new Pantum CTL-1100C cyan toner cartridge from its packaging.
Remove any protective tapes or covers from the new toner cartridge.
Hold the new toner cartridge by its handle and align it with the corresponding slot inside the printer.
Slide the toner cartridge firmly into place until it clicks or locks into position.
Close the printer's front cover or toner access panel.
Plug in and turn on your Pantum printer.
Your printer should now recognize the new cyan toner cartridge, and you should be able to print with the cyan color. Remember to properly dispose of the used toner cartridge according to local regulations or recycling guidelines.